Nebula upgrade kit for Bresser EXOS-2 mounts

So you already own a Bresser EXOS-2 mount and want to take a big step forward into the world of Astrophotography? Then the Nebula Goto Kit is exactly the upgrade that will take your Astrophotography to another level. This kit contains the same motors and control unit fitted to the premium Bresser Nebula astrophotography mounts.

This modern system offers you several options for control. You can operate the mount directly via its own Nebula control interface using your smartphone or tablet (iOS and Android supported). Alternatively, you can also use a planetarium software like Sky Safari or Stellarium for example.

Of course, fully manual control remains an option too. For this, a hand controller for minor corrections or simple control commands is included in the delivery.

In addition, with the Bresser Nebula Goto Kit, you can connect your laptop or PC directly via WLAN or LAN cable (recommended for faster data transmission) to the Nebula control unit. This not only gives you full control over the mount, but also allows you to connect several devices such as cameras, motor focus, filter wheel, etc., directly to the control unit via various USB ports. This eliminates the need to connect each device to your computer via separate cables. The pre-installed program KStars / EKOS lets you comfortably control all devices from your PC or laptop.

Electronic polar alignment or guiding can also be easily implemented with the Goto Kit, provided you have a camera connected. Additionally, you are not limited to the software of the Nebula control unit. Thanks to the installed ASCOM Alpaca driver, you can use your own programs on your computer to control the mount – be it APT or N.I.N.A. The two stepper motors with belt drives ensure a smooth, direct drive of both the two axes. You just need to make sure you mount is correctly balanced.

Features:

• Belt drive for more precise, quieter tracking
• Stepper motors with high resolution (0.36´/microstep)
• Hand controller for direct control of the mount
• Virtual hand controller for smartphones and tablets
• PC control – via ASCOM
• USB ports for cameras, motors, filter wheels, etc.

Whats included:

1. 2 stepper motors for both axes (RA and DEC)
2. Raspberry Pi control unit
3. Basic hand controller
4. 230V / 12V / 3 A power supply
5. Connection cable
6. Manual for download